中文      EN

How are the nails installed in the nail gun? What should I pay attention to?
2019-09-20 10:35:11

Nail shooting is the use of gunpowder gas generated by firing empty bullets as a power to drive nails into a building. It usually consists of a nail plus a gear ring or plastic positioning snap ring. Can be penetrated into objects such as wood, walls, etc. So how to install the nail

1. It is not recommended to use a nail driver to operate on a soft substrate, such as wood or soft soil, as this operation may damage the brake ring of the nail driver, thereby affecting its normal use.

Special fastener for nail gun

2. For soft and low strength fixed objects, such as acoustic panels, thermal insulation panels, grass fiber boards, etc., if the general nail fixation method is used, the fixed object will be damaged. Therefore, nails with metal gaskets should be used to achieve an ideal fixation effect.

3. After installing the nail cartridge, it is strictly prohibited to directly push and press the nail tube by hand.

4. Do not aim the nail gun loaded with the nail cartridge at others.

5. During shooting, if a nail projectile does not ignite, it should be stopped for at least 5 seconds before moving the nail launcher.

Galvanized gas nail

6. After the use of the nail ejector, or before repair and maintenance, it is necessary to take out the nail cartridge first.

7. When shooting soft materials (such as wood), fasteners, or substrates, the power of the nail projectile should be selected appropriately. Excessive power will break the piston rod.

8. The nail shooter has been in use for a long time, and vulnerable parts (such as piston rings) should be replaced in a timely manner, otherwise the shooting effect is not ideal (such as reduced power).

Indoor window installation with emission nails

9. After shooting, timely wipe or clean all parts of the nailer.

10. Various nail drivers have instructions. Before using, you should read the instructions to understand the principle, performance, structure, disassembly and assembly methods of the nail driver, and observe the prescribed precautions.

11. To ensure the safety of you and others, please strictly use matching nail shooting equipment